Electrocoagulation Rectifiers

Sol Rectifiers PHFSPD EC

Programmable High Frequency Switching Power Devices

Description

Our electrocoagulation rectifiers are reasonably priced, provided with automated polarity reversing as a standard feature suitable for the most demanding wastewater treatments applicable found in many industries:

Residential
Hospitality
Electroplating
Mining and metal processing
Municipal sewage
Petroleum
Pulp and paper
Textile

Intuitive LCD Interface

plating rectifier interface, electroplating rectifier interface, programmable plating rectifier interface, programmable electroplating rectifier interface

Technology

IGBT programmable high frequency switching power device

DC Smoothed Wave Output

Low ripple smoothed wave electrocoagulation rectifiers suitable for the most stringent wastewater treatment requirements

Standard Features

CONST PR – Constant polarity reversing smoothed wave output

PLC communication port RTU RS485

Optional Features

PLC analogue signal communication port 0-10 V or 0-5 V or 4-20 mA
Parallel pairing

Other Available Rectifier Models

Electrocoagulation

electrocoagulation, electrocoagulation process, electrocoagulation cell

Electrocoagulation Process

Electrocoagulation is an electrolytic process that uses sacrificial electrodes to dislodge and separate from wastewater a large variety of organic and inorganic pollutants without the need to add any chemical coagulating agent.

The sacrificial electrodes are usually made of materials such as iron, steel or aluminum.

Electrooxidation Process

Electrooxidation is an electrolytic process that uses inert electrodes to degrade, dislodge and separate from wastewater a large variety of organic and inorganic pollutants.

The inert electrodes are usually made of materials such as platinized titanium, platinized mixed metal oxides etc.

Electrocoagulation Rectifiers

plating rectifier, electroplating rectifier, programmable plating rectifier, programmable electroplating rectifier
plating rectifier controller, electroplating rectifier controller, programmable plating rectifier controller, programmable electroplating rectifier controller
plating rectifier, electroplating rectifier, programmable plating rectifier, programmable electroplating rectifier
plating rectifier controller, electroplating rectifier controller, programmable plating rectifier controller, programmable electroplating rectifier controller
plating rectifier, electroplating rectifier, programmable plating rectifier, programmable electroplating rectifier
plating rectifier controller, electroplating rectifier controller, programmable plating rectifier controller, programmable electroplating rectifier controller
plating rectifier parallel pairing, electroplating rectifier parallel pairing, programmable plating rectifier parallel pairing, programmable electroplating rectifier parallel pairing

Compact Bench Top Electrocoagulation Rectifiers

Volt Output Range

Standard unit 0~12 V
Other output on request

Ampere Output Range
30 A, 50 A, 100 A, 150 A, 200 A

Remote Control Bench Top Electrocoagulation Rectifiers

Volt Output Range

Standard unit 0~12 V
Other output on request

Ampere Output Range

50 A, 100 A, 150 A, 200 A, 300 A, 500 A, 1000 A

Remote Control Small Tower Electrocoagulation Rectifiers

Volt Output Range

Standard unit 0~12 V
Other output on request

Ampere Output Range

1500 A, 2000 A, 2500 A

Remote Control Large Tower Electrocoagulation Rectifiers

Volt Output Range

Standard unit 0~12 V
Other output on request

Ampere Output Range

3000 A, 4000 A, 5000 A, 6000 A, 7000 A, 8000 A, 10000 A

CONST PR– Constant Polarity Reversing Smoothed Wave Output

Pre-Settable Parameters

Mode CV or CC
Output for forward V or A
Output for reverse V or A
Timer for soft start
Timer for soft stop
Timer for forward cycle
Timer for reverse cycle
Timer for total forward and reverse cycles auto cut-off

CV/CC
0 to unit rated output
0 to unit rated output
0 to 9999 S
0 to 9999 S
0 to 9999 S/M/H
0 to 9999 S/M/H
0 to 9999 S/M/H

Simple Operation

Sol Rectifiers PHFSPD EC

These are programmable closed loop self-regulating units, which output can be set from 0 V to unit rated V output or from 0 A to unit rated A output.

Operator pre-sets unit either in Constant Volt (CV) or in Constant Current (CC) mode.
Then pre-sets forward required output for the respective selected mode, for instance 6.8 V when in CV mode or 92.7 A when in CC mode.
Then pre-sets reverse required output for the respective selected mode, for instance 4.2 V when in CV mode or 31.5 A when in CC mode.
Then pre-set the timer to control forward plating duration before the unit automatically reverse polarity.
Then pre-set the timer to control reverse plating duration before the unit automatically reverse polarity.
Then pre-sets the total forward and reverse time during which automatic repetitive polarity reversing cycles will occur, the unit will automatically cuts off the output at the end and rings the alarm.

The moment operator presses the Start key the unit will automatically maintain the pre-set output value no matter any fluctuations in the plating cell resistance or in the main electrical supply to the unit for absolute plating consistency and precise control.

Operator can also pre-set a ramp up time cycle on start. Here the unit will gradually ramp up output to the pre-set output value in the given set time.

Durability & Care Free Operation

Relying on our state of the art electronic protection circuitry, our units are known to operate trouble free for years on and into decades.

When units are placed in a clean fresh air environment, care free operation can be expected. Only minimal air fan cleaning may be required once or twice a year.

Order Quantity & Shipping Options

Single order unit are welcomed.

We ship straight from the factory to any parts of the world.

Depending on order weight or volume the following shipping services are available:

Speed courier
Air freight
Air freight door-to-door
Sea freight
Sea freight door-to-door

Worldwide Customers

We have a large number of satisfied customers using on a daily basis our plating rectifiers in various countries, to name a few:

Australia, Austria, China, Denmark, Indonesia, Malaysia, Philippines, New Zealand, Singapore, South Africa, Thailand, United Kingdom of Great Britain, United State of America, Vietnam, etc.

Specifications